Coils & sheets
HRPO pickled and oiled coils and sheets
HRPO is hot rolled steel that has been through an acid pickling line to strip the mill scale, then lightly oiled so it doesn't rust in storage. You get HR strength with a clean surface that welds, bends and takes paint properly.
Also called: Hot rolled pickled and oiled, P&O coil, Pickled coil, HRPO sheet
Shipped anywhere in India, billed on a GST invoice.
Sizes and specifications
- Thickness
- 1.6 – 6 mm
- Width
- 900 – 1,500 mm
- Grades
- IS 1079 HR1–HR4IS 2062 E250
- Surface
- Pickled, oiled
- Forms
- CoilSheetSlit
Typical mill ranges. Other sizes on request — send your requirement and we'll confirm.
Grades and standards
- IS 1079 HR1–HR4
- From general forming (HR1) to deep drawing (HR4). Most automotive and pressing work uses HR2–HR4.
- IS 2062 E250
- Structural grade, pickled — for fabrication that will be painted or powder coated.
Where it goes
- Automotive pressings
- Brackets and components
- Painted fabrication
- Compressor and tank shells
Not sure it's the right one?
Below about 1.6 mm, or where you need a tighter thickness tolerance and a smoother finish, cold rolled (CR) is the usual choice.
See CR — Cold rolled (CRCA)Get a quote
Four fields are enough for a first price. Add sizes if you have them.