Coils & sheets
CR and CRCA coils and sheets
Cold rolled steel is HR that has been pickled and rolled again at room temperature, then annealed. It is thinner, flatter and closer on thickness than HR, with a bright, smooth surface ready for painting, plating or powder coating.
Also called: Cold rolled coil, CRCA sheet, Cold rolled close annealed, CR sheet, CR slit coil
Shipped anywhere in India, billed on a GST invoice.
Sizes and specifications
- Thickness
- 0.30 – 3.0 mm
- Width
- 900 – 1,500 mm
- Grades
- IS 513 (Part 1) CR1–CR5
- Surface
- Bright, oiled
- Forms
- CoilSheetSlit
Typical mill ranges. Other sizes on request — send your requirement and we'll confirm.
Grades and standards
- IS 513 CR1
- Commercial quality, for simple bending and general sheet-metal work.
- IS 513 CR2
- Drawing quality, for moderate pressing.
- IS 513 CR3
- Deep drawing quality.
- IS 513 CR4 and CR5
- Extra deep drawing. CR5 is interstitial-free steel for the most severe pressings.
Where it goes
- Steel furniture
- Panels and enclosures
- Appliances
- Drums and precision tubes
Not sure it's the right one?
If the part will be outdoors or unpainted, galvanised (GP) is cold rolled steel with a zinc coat against rust.
See GP — Galvanised (GI)Get a quote
Four fields are enough for a first price. Add sizes if you have them.